Clean Room Ceilings Walk On & Standard Suspended False Ceilings
Nicomac T grid type
Our unique T-grid walks on clean room suspended ceilings consist of a load-bearing structure made of aluminum suitable to support ceiling
panels, lights and filter units. The T-grid is supported by threaded tension bars with adjustable turnbuckles that are fastened to
the overhead support at 4 intervals. There is a selection of two standard panel sizes: 2' x 2' (605 x 605 mm) or 2' x 4' (605 x 1210
Tiles for our clean room ceilings can be designed to be flush to the grid. Depending on the type of tile used the entire ceiling
system can be certified as walk on (single load of 160 Kg (352 Lb) in a square meter of false ceiling and situated in the most unfavorable
Our pharmaceutical T grid false ceilings can be used when ceiling maintenance is provided for the room and walk on ceilings are not necessary.
Dedicated less expensive pharmaceutical grade tiles are used in this case.
Click on the thumbnail below to view image
Advantages of Nicomac unique walk on T grid system
T grid system requires not cut outs for filters and light fixtures
Flexibility while positioning filters and light fixtures
Flush to the grid walk on system!
Hermetic false suspended ceiling
1250 mm x 3000 mm (4' x 10') false ceiling
This is a hermetic false suspended ceiling. Flexible and easy to assemble, it can be installed before or after wall location. This kind of false
ceiling is made by means of polystyrene or polyurethane panels sandwiched between two layers of aluminum plates. Both sides are pre-painted
with epoxy powder coating. All sides are closed by aluminum frame. The result is a perfectly smooth and coplanar surface that is very easy
to clean. The bearing aluminum profile is housed by clicking-in between panels. There is a threaded tension bar, with an adjustment ring, to
be fastened to the existing ceiling.
Filter, light and other filter accessories can be accessed from the top of the clean room ceiling. Holes for filters, light and utilities are prepared
at our site with HI tech Numeric Control Pantograph.
Headquarters: Nicomac srl
Nicomac Europe Srl
Via Curiel, 12
20060 Liscate - Milano - Italy
Ph. +39 02 9542041
Fax +39 02 95420444